Curriculum Vitae

 

Syamak Hosseinnedjad, PhD
Associate Professor of Materials Science and Engineering


Personal:


SYAMAK HOSSEIN NEDJAD

Associate Professor, Ph. D.

Faculty of Materials Engineering, Sahand University of Technology

P. O. Box: 51335-1996, Tabriz, Iran.

Tel: +98-411-345 9449, Fax: +98-411-344 4333

E-mail address: hossein@sut.ac.ir


 

EDUCATION:

 

Ph. D.  Materials Engineering, University of Tehran, April 2005, Tehran, Iran

-Thesis: Control of microstructure and mechanical properties of cobalt-free maraging steels

M. Sc.   Metallurgical Engineering, University of Tehran, December 1999, Tehran, Iran.

-Thesis: Control of microstructure and mechanical properties of cast maraging steels

B. Sc.   Metallurgical Engineering, Sahand University of Technology, July 1997, Tabriz, Iran

 

RESEARCH INTRESTS:

  1. Principles of phase transformations in metals
  2. Embedded precipitation nanostructures 
  3. Interfacial phenomena in metallic materials
  4. X-ray and electron diffraction

 

COURSES TAUGHT:

  1. Physical properties of materials (1), Undergraduate, SUT, Tabriz, Iran.
  2. Phase transformations, Graduate (M. Sc.), SUT, Tabriz, Iran.
  3. Interfaces in materials, Graduate (Ph. D.), SUT, Tabriz, Iran.
  4. Meteorology of nanomaterials , Graduate (Ph. D.), SUT, Tabriz, Iran.

 

POSITIONS HELD:

  1. Visiting researcher, Kyoto University, Japan, May 2002-March 2003.
  2. Assistant Prof., SUT, Tabriz-Iran, 2005-2008.
  3. Associate Prof., SUT, Tabriz-Iran, 2008-Present.
  4. Director of research affairs, SUT, Tabriz-Iran, March 2009-Jan. 2010.
  5. Member, Center of Excellence (COE) for High-Performance Materials, University of Tehran, Tehran-Iran. 2010-Present,
  6. Vice-chancellor of research affairs, SUT, Tabriz-Iran, July 2014-present.

 

Technical skills:

1.      Vacuum melting and processing of clean steels

2.      Optical and electron microscopy of metallic materials

           

JOURNAL PAPERS PUBLISHED:

1.      S. Hossein Nedjad and M. Nili Ahmadabadi, “Effect of Ti addition on the microstructure and mechanical properties of a cast Fe-Ni-Mo-Mn maraging steel”, J. Phys. France, 112 (2003) 461-464.

2.      S. Hossein Nedjad, M. Nili Ahmadabai, R. Mahmudi and H. Farhangi, “Effect of conventional and subzero treating on the mechanical properties of aged martensitic Fe-12 Ni-X Mn alloys”, Mater. Sci. Eng. A, A 378 (2004) 314-318.

3.      S. Hossein Nedjad, M. Nili Ahmadabadi, R. Mahmudi, T. Furuhara and T. Maki, “Analytical transmission electron microscopy study of grain boundary precipitates in an Fe-Ni-Mn maraging alloy”, Mater. Sci. Eng. A, 438–440 (2006) 288–291.

4.      S. Hossein Nedjad, M. Nili Ahmadabadi, T. Furuhara and T. Maki, “High resolution transmission electron microscopy study on the nano-scale twining of θ-NiMn precipitates in an Fe-Ni-Mn maraging alloy”, Phys. Stat. Sol. A, 203 (2006) 2229-2235.

5.      S. Hossein Nedjad, M. Nili Ahmadabadi, T. Furuhara and T. Maki, “Evolution of precipitate coarsening reaction in a nanostructured Fe-Ni-Mn maraging alloy”, Solid State Phenomena, 114 (2006) 159-164.

6.      S. Hossein Nedjad and A. Farzaneh, "Formation of fine intragranular ferrite in cast plain carbon steel inoculated by titanium oxide nanopowder", Scripta Mater. 57 (2007) 937–940.

7.      S. Hossein Nedjad, M.R. Movaghar Garabagh, M. Nili Ahmadabadi and H. Shirazi, "Effect of further alloying on the microstructure and mechanical properties of Fe-9Ni-5Mn-5Mo maraging steel", Mater. Sci. Eng. A, 473 (2008), 249-253.

8.      S. Hossein Nedjad, H. Meidani and M. Nili Ahmadabadi, "Effect of equal channel angular pressing on the microstructure of a semisolid aluminum alloy", Mater. Sci. Eng. A 475 (2008) 224-228.

9.      S. Hossein Nedjad, M. Nili Ahmadabadi, and T. Furuhara, "Transmission electron microscopy study on the grain boundary precipitation of an Fe-Ni-Mn maraging steel", Metall. Mater. Trans. A, 39A (2008) 19-27.

10.  S. Hossein Nedjad, M. Nili Ahmadabadi, T. Furuhara, "The extent and mechanism of nanostructure formation during cold rolling and aging of lath martensite in alloy steel", Mater. Sci. Eng. A 485 (2008) 544-549.

11.  S. Hossein Nedjad, M. Nili Ahmadabadi and T. Furuhara, "Correlation between the intergranular brittleness and precipitation reactions during isothermal aging of an Fe-Ni-Mn maraging steel", Mater. Sci. Eng. A, 490 (2008) 105-112.

12.  M.R. Movaghar Garabagh, S. Hossein Nedjad, H. Shirazi, M. Iranpour Mobarekeh, M. Nili Ahmadabadi, "X-ray diffraction peak profile analysis aiming at better understanding of the deformation process and deformed structure of a martensitic steel", Thin Solid Films, 516 (2008) 8117-8124.

13.   M. Iranpour Mobarake, M. Nili-Ahmadabadi, B. Poorganji, A. Fatehi, H. Shirazi,T. Furuhara, M. Habibi Parsa, S. Hossein Nedjad, "Microstructural study of an age hardenable martensitic steel deformed by equal channel angular pressing",  Mater. Sci. Eng. A, 491 (2008) 172-176.

14.  H. Meidani, S. Hossein Nedjad, M. Nili Ahmadabadi, "A novel process for fabrication of globular structure by equal channel angular pressing and isothermal treatment of semisolid metal", Solid State Phenomena, 141-143 (2008) 445-450.

15.   M. Nili-Ahmadabadi, H. Shirazi, A. Fatehi, S. Hossein Nedjad, " Improvement in mechanical properties of Fe-Ni-Mn maraging steel by heavy cold rolling", Int. J. Modern Phys. B 22 (2008) 2814-2822.

16.   M.R. Movaghar Garabagh, S. Hossein Nedjad, M. Nili Ahmadabadi, " X-ray diffraction study on a nanostructured 18Ni maraging steel prepared by equal-channel angular pressing", J. Mater. Sci. 43 (2008) 6840-6847.

17.   S. Hossein Nedjad, M.R. Movaghar Gharabagh, " Dislocation structure and crystallite size distribution in lath martensite determined by X-ray diffraction peak profile analysis", Int. J. Mater. Res. 99 (2008) 1248-1255.

18.  S. Hossein Nedjad, M. Nili Ahmadabadi, T. Furuhara, "Annealing behavior of an ultrafine-grained Fe–Ni–Mn steel during isothermal aging", Mater. Sci. Eng. A 503 (2009) 156-159.

19.  S. Hossein Nedjad, S. Meimandi, A. Mahmoudi, T. Abedi, S. Yazdani, H. Shirazi, M. Nili Ahmadabadi, "Effect of aging on the microstructure and tensile properties of Fe-Ni-Mn-Cr maraging alloys", Mater. Sci. Eng. A 501 (2009) 182-187.

20.  S. Hossein Nedjad, J. Teimouri, A. Tahmasebifar, H. Shirazi, M. Nili Ahmadabadi, “A new concept in further alloying of Fe—Ni—Mn maraging steels”, Scripta Mater. 60 (2009) 528-531.

21.  H. Ghasemi-Nanesa, M. Nili-Ahmadabadi, H. Shirazi, S. Hossein Nedjad, S.H. Pishbin, "Ductility enhancement in ultrafine-grained Fe-Ni-Mn martensitic steel by stress-induced reverse transformation", Mater. Sci. Eng. A 527 (2010) 7552-7556.

22.  M. Nili Ahmadabadi, H. Shirazi, H. Ghasemi-Nanesa, S. Hossein Nedjad, B. Poorganji, T. Furuhara, "Role of severe plastic deformation on the formation of nanograins and nano-sized precipitates in Fe-Ni-Mn steel", Mater. Design. 32 (2011) 3526-3531.

23.  S. HosseinNedjad, Y. Zahedi Moghaddam, A. Mamdouh Vazirabadi, H. Shirazi, M. Nili Ahmadabadi, "Grain refinement by cold deformation and recrystallization of bainite and acicular ferrite structures of C–Mn steels", Mater. Sci. Eng. A 528 (2011) 1521–1526.

24.   S. Hossein Nedjad, F. Hosseini Nasab, M.R. Movaghar Garabagh, S.R. Damadi, M. Nili Ahmadabadi, " X-ray diffraction study on the strain anisotropy and dislocation structure of deformed lath martensite", Metall. Mater. Trans. A, 42A (2011) 2493-2497.

25.  A. Mahmoudi, M.R. Zamanzad Ghavidel, S. Hossein Nedjad, A. Heidarzadeh, M. Nili Ahmadabadi, “Aging behavior and mechanical properties of maraging steels in the presence of submicrocrystalline Laves phase particles”, Mater. Charac., 62 (2011) 976-981.

26.  H. Shirazi, G. Miyamoto, S. Hossein Nedjad, H. Ghasemi-Nanesa, M. Nili Ahmadabadi, T. Furuhara, “Microstructural evaluation of austenite reversion during intercritical annealing of Fe–Ni–Mn martensitic steel”, J. Alloys and Comp., 577 (2013) S572-577.

27.  B. Avishan, S. Yazdani, S. Hossein Nedjad, “Toughness variations in nanostructured bainitic steels”, Mater. Sci. Eng. A, 548 (2012) 106-111.

28.  H. Ghadimi, S. Hossein Nedjad, B. Eghbali, “Enhanced grain refinement of cast aluminium alloy by thermal and mechanical treatment of Al-5Ti-B mater alloy”, Trans. Nonferrous Met. Soc. China 23(2013) 1563−1569.

29.  T. Jalal, S. Hossein Nedjad, S. Khalili Molan, “Structure and magnetic properties of nanostructured MnNi alloys fabricated by mechanical alloying and annealing treatments”, Phys. Met. Metallogr., 114 (2013) 400-405.

30.  F. Hosseini Nasab, S. Hossein Nedjad, and S. Karimi, “A Comparison Between the Dislocation Structure of Ball-Milled Iron and Copper as Derived from the X-Ray Diffraction Peak Profile Analyses”, Phys. Met. Metallogr., 114 (2013) 1069-1073.

31.  M.R. Movaghar Grarabagh, S. Hossein Nedjad, H. Hamed Zargari, M. Nili Ahmadabadi, “Transformation Mechanism of Preprecipitation NiMn Nanostructures”, Metall. Mater. Trans. A, 45 (2014) 1057-1067.

32.  A.A. Emdadi, S. Hossein Nedjad, H.G. Badri, “Effect of solidification texture on the magnetostrictive behavior of Galfenol”, Metall. Mater. Trans. A, 45A (2014) 906-910.