Curriculum Vitae

 

Morteza Azarbarmas, PhD
Assistant Professor of Materials Science & Engineering


Personal:
  • Name: Morteza
  • Surname: Azarbarmas
  • Date and Place of Birth: 23 August 1986, Tabriz, Iran
  • Marital Status: Married
  • Address: Faculty of Materials Engineering, Sahand University of Technology, Tabriz, Iran
  • E-Mail: azarbarmas@sut.ac.ir
  • Nationality: Iranian


Education and qualifications:
  • Ph.D. Degree in Materials Engineering,  K.N.Toosi University of Technology, Tehran, Iran, 2016
  • Ph.D. Sabbatical, Polytechnic University of Catalonia, Barcelona,  Spain, 2014
  • M.Sc. Degree in Materials Engineering, University of Tehran, Tehran, Iran, 2010
  • B.Sc. Degree in Materials Engineering, Sahand University of Technology, Tabriz,  Iran, 2007
Awards and Distinctions:
  • Ph.D. National outstanding student (Iran's Ministry of Science, Research, and Technology), 2015
  • Ph.D. outstanding student of K.N. Toosi university, 2015
  • Appreciated at the Research Festival of University of Tehran, 2010

Publications:

Journal Publications:

1- M. Azarbarmas, M. Aghaie-Khafri, A New Cellular Automaton Method Coupled with a Rate-dependent (CARD) Model for Predicting Dynamic Recrystallization Behavior, Metallurgical and Materials Transactions A, 6 March 2018.

2- M. Azarbarmas, M. Aghaie-Khafri, Dynamic recrystallization and texture modeling of IN718 superalloy, Modelling and Simulation in Materials Science and Engineering, 2017, 25.

3- M. Azarbarmas, M. Aghaie-Khafri, J.M. Cabrera, J. Calvo , Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions, Journal of Materials and Design (ISI), 15 March 2016.

4- M. Azarbarmas, M. Aghaie-Khafri, J.M. Cabrera, J. Calvo, Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718, Journal of Materials Science and Engineering A (ISI), 15 December 2016.

5- Sadegh Hoseinlaghab, Seyed Sajad Mirjavadi, Nasser Sadeghian , Iraj Jalili, M. Azarbarmas, Mohammad Kazem Besharati Givi , Influences of welding parameters on the quality and creep properties of friction stir welded polyethylene plates, Journal of Materials and Design (ISI), 15 February 2015.

6- Mostafa Karamouz, Mortaza Azarbarmas, Masoud Emamy, On the conjoint influence of heat treatment and lithium content on microstructure and mechanical properties of A380 aluminum alloy, Journal of Materials and Design (ISI), July 2014, 59.

7- Mostafa karamouz, Mortaza Azarbarmas*, Masoud Emamy, Mohammad Alipour, Microstructure, hardness and tensile properties of A380 aluminum alloy with and without Li additions, Journal of Materials Science and Engineering A (ISI), 10 October 2013 , 582, 409-414.

8- M. Alipour, M. Azarbarmas, F. Heydari, M. Hoghoughi, M. Alidoost, M. Emamy, The effect of Al–8B grain refiner and heat treatment conditions on the microstructure, mechanical properties and dry sliding wear behavior of an Al–12Zn–3Mg–2.5Cu aluminum alloy, Journal of Materials and Design (ISI), June 2012, , 38, 64-73.

9- Mortaza Azarbarmas, Masoud Emamy,  Jafar Rassizadehghani, Mohammad Alipour, Mostafa karamouz, The Influence of Beryllium Addition on the Microstructure and Mechanical Properties of Al–15%Mg2Si In-situ Metal Matrix Composite, Journal of Materials Science and Engineering A (ISI), 25 October 2011 , 528, (28), 8205-8211.

10- Mortaza Azarbarmas, Masoud Emamy, Mostafa karamouz, Mohammad Alipour Jafar Rassizadehghani, The effects of boron additions on the microstructure, hardness and tensile properties of in situ Al–15%Mg2Si composite, Journal of Materials and Design (ISI), December 2011, 32, (10), (5049-5054).

11- Mortaza Azarbarmas, Masoud Emamy, Mohammad Alipour, Study on fracture behaviour of Al–15%Mg2Si metal matrix composite with and without beryllium additions, Journal of Materials Science (ISI)¸ November 2011, 46, (21), 6856–6862.

12- Alipour, M., Emamy, M., Ebrahimi, S. S., Azarbarmas, M., Karamouz, M., & Rassizadehghani, J. (2011). Effects of pre-deformation and heat treatment conditions in the SIMA process on properties of an Al–Zn–Mg–Cu alloy modified by Al–8B grain refiner, Journal of Materials Science and Engineering A (ISI), 2011, 528, (13–14), 4482-4490.

13- M. Karamouz, M. Emamy, M. Alipour, M. Azarbarmas, The Effects of Li on the Tensile Properties of 380 Aluminum Alloys, Journal of New Materials (علمی پژوهشی), 2011.

14- Mortaza Azarbarmas , Seyyed Mohammad Hossein Siadati, A review: Graphene; A revolution in nanotechnology, Journal of Nano World, (علمی ترویجی), 2012.

Conference papers:

1- Mortaza Azarbarmas, Masoud Emamy,  Jafar Rasizadeh,  Mohammad Alipour, Mostafa karamouz, The influence of Boron on Properties of Al–15%Mg2Si in situ composite, CCFA2010

2- M. Azarbarmas,  M. Emamy,  M. Alipour , M. karamouz, Effects of Boron on Microstructure and Tensile Properties of Al–Mg2Si Metal Matrix Composite, NUMIFORM2010, South Korea.

3- M. Alipour,  M. Emamy, M. Azarbarmas, M. karamouz, Effects of Al–5Ti–1B master alloy on the microstructural evaluation of a highly alloyed aluminum alloy produced by SIMA process, NUMIFORM2010, South Korea.

4- Mortaza Azarbarmas,  Masoud Emamy, Jafar Rasizadeh, Mohammad Alipour Mostafa karamouz, The Influence of Boron on the Tensile Properties of Al–Mg2Si in Situ Composite, Iccst2011.

5- Mortaza Azarbarmas,  Masoud Emamy, ,  Jafar Rassizadehghani, Mohammad Alipour , Mostafa karamouz, Modification of Al–Mg2Si In-Situ Composite by Boron, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

6- Mortaza Azarbarmas,  Masoud Emamy,  Jafar Rassizadehghani, Mohammad Alipour and Mostafa karamouz, Microstructural Development of Al–15%Mg2Si in Situ Composite with Be Addition, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

7- Mortaza Azarbarmas,  Masoud Emamy,  Jafar Rassizadehghani,  Mohammad Alipour , Mostafa karamouz, The Effects of Be on mechanical properties of Al–Mg2Si in Situ Composite, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

8- Mortaza Azarbarmas,  Masoud Emamy,  Jafar Rassizadehghani,  Mostafa karamouz ,  Mohammad Alipour, The effects of cooling rate on the microstructure and hardness of Al–15%Mg2Si in situ composite with Boron, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

9- Mohammad Alipour, Masoud Emamy,  Jafar Rasizadeh,  Mostafa karamouz ,  Mortaza Azarbarmas, Effects of Al–٨B grain refiner on the structure, hardness and tensile properties of a new developed super high strength aluminum alloy, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

10- Mohammad Alipour,  Masoud Emamy, Jafar Rasizadeh,  Mostafa karamouz , Mortaza Azarbarmas, Effects of Al–5Ti–1B grain refiner on the structure, hardness and tensile properties of a new developed super high strength aluminum alloy, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

11- Mohammad Alipour,  Masoud Emamy,  Jafar Rasizadeh,  Mostafa karamouz ,  Mortaza Azarbarmas, The effects of Al–5Ti–1B grain refiner and heat treatment on the microstructure and dry sliding wear behavior of a new developed super high strength aluminum alloy, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

12- M. Alipour,  M. Emamy,  J. Rasizadeh,  M. Azarbarmas,  M. Karamouz, Effect of predeformation and heat treatment conditions in the modified SIMA process on microstructural of a new developed super high-strength aluminum alloy modified by Al-8B grain refiner, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

13- Mostafa karamouz ,  Masoud Emamy, Jafar Rasizadeh , Mohammad Alipour ,  Mortaza Azarbarmas, The Influence of Li on Properties of 380 Aluminum Casting Alloys, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.

14- Mostafa karamouz, Masoud Emamy,  Jafar Rasizadeh, Mortaza Azarbarmas ,  Mohammad Alipour, The effects of Li additions on the microstructure and mechanical properties of  380 Aluminum casting alloys, U.S.A., TMS2011;  Book Chapter in Supplemental Proceedings: General Paper Selections.